Semi-automatic linear edge banding machine 
 This type of machine is mainly used for roll tape and hot melt edge on solid wood panels, particle board, block board, medium density fiberboard and other sheet metal straight edge of the edge, flat repair and polishing, so that after processing the sheet edge is even and firm trimming smooth and beautiful. The machine can complete transfer sheet, send tape, adhesive, pressure zone, shear zone, up and down trimming, scraping down side, up and down automatically polishing procedures, including "trimming down" to achieve the effect of forming, trimming knife Speed ??8000R / M, "polishing up and down" function, can be 45 degrees to 90 degrees angle adjustment. Effect of the processing up to the level of similar foreign, particularly suitable for the production of high-end furniture, cabinets, decorative materials processing, and other manufacturers use. 
 Main technical parameters 
 Sheet thickness 8-45mm 
 Edge with a high degree of roll 12-50mm 
 Thickness of roling edge-banding belt 0.4-3mm 
 Processing of sheet width ≥ 90mm 
 Processing sheet length> 280mm 
 Sheet conveying speed: 7m/min (Promise speed) 
 Compressed air pressure: 0.7mpa 
 Sheet conveying motor: 0.75kw 50HZ 380V 
 Glue the motor: 280W 
 Finishing Motor: 0.75x2 12000R / M 200HZ 
 Polishing Motor: 0.18kwx2 1400r/min 50hz 
 Plastic box heating power: 1.8kw 
 Total power 5.60kw 
 Dimensions: approximately 2600x1000x1400mm 
 Weight: About 1000kgs